K3500 K3501 Diaphragm Kit For Goyen Pulse Jet Valve CA35T RCA35T
Quick details:
| Product Name: | Pulse Valve Diaphragm | Ordering Number: | K3500 (M1581), K3501 |
|---|
| Diaphragm Material: | NBR, | Seat Material: | Rubber, Nylon |
|---|
| 1 Set: | 1x Diaphragm, 1x Spring | Fitted Pulse Valve Model: | CA35T, RCA35T |
|---|
Skills requirement:
Since the electromagnetic pulse valve diaphragm is a flexible
mechanism that needs to be opened and closed frequently to control
air circulation, it requires not only good flexibility, but also
the highest possible sealing performance, so the material of the
pulse valve diaphragm is It is directly related to the service life
and use effect of the pulse valve diaphragm. In other words, the
quality of the pulse valve diaphragm directly affects the working
stability of the pulse bag filter dust cleaning system, and is also
directly related to the use cost of the dust removal equipment.
Generally All pulse valve diaphragms have a promise of service life
or the number of actions, and the pulse valve diaphragm used can
directly reduce the use cost of dust removal equipment.
Brief introduction of electromagnetic pulse valve diaphragm:
The electromagnetic pulse valve diaphragm is a whole piece of
rubber diaphragm installed with a riveting head used to block the
compressed air pipeline or the air outlet of the blocking valve, a
venting unloading hole and a bolt hole for fixed support around it.
It is the key control part in the electromagnetic pulse valve.
Working principle:
The electromagnetic pulse valve diaphragm divides the pulse valve
into two air chambers. When the pressure of the rear air chamber
makes the diaphragm close to the air outlet of the valve, the pulse
valve is in a closed state, the pulse controller outputs a signal
to move the armature of the pulse valve, the vent hole of the air
chamber behind the valve is opened, and the rear air chamber
quickly loses pressure, making the The diaphragm moves backward,
the compressed air is blown through the outlet of the valve, the
pulse valve is in the open state, the injection starts, the
electrical signal output by the pulse controller disappears, the
electromagnetic pilot of the pulse valve is reset, the vent hole of
the rear air chamber is closed, and the back When the pressure of
the air chamber rises, the diaphragm of the pulse valve is close to
the air outlet of the valve, the pulse valve is in the closed
state, and the injection stops. The length of the injection time is
controlled by the controller.
Our service:
1. Packaging is neutral packing or customized packing.
2. We will reply you within 24 hours.
3. We will also provide you with good after-sales service.
4. OEM or ODM orders are welcomed.
5. Trial orders are acceptable.
6. High quality and factory price.
7. 100% ensured the quality.
